- Bond it A43 threadlock can be used as a locking compound for direct application to lightly oiled components, thus reducing the need for pre treatment.
- Also suitable as a standard anaerobic thread locker for fine to medium pitch threads.
- Preparation: remove heavy oil and grease contamination.
- Best results are obtained on clean parts.
A43 Threadlock Locking Compound
£8.69 – £9.99
Application: Apply sufficient adhesive to coat the threads. The adhesive will start to cure on the exclusion of air from the bonding system. Observe handling and strength times stated below. Limitations: A43 THREADLOCK is designed for metal bonding. Users should satisfy themselves as to the product’s efficacy when used in conjunction with engineering rubbers and plastics. Not recommended for use with accelerators. The strength of the Threadlock bond will be substantially lower on Stainless Steel. On certain grades, it may not work at all without the use of an activator. It is the userâs responsibility to check the suitability of this product with their particular application.
- Bond it A43 threadlock can be used as a locking compound for direct application to lightly oiled components, thus reducing the need for pre treatment.
- Also suitable as a standard anaerobic thread locker for fine to medium pitch threads.
- Preparation: remove heavy oil and grease contamination.
- Best results are obtained on clean parts.
Share
Description
Additional information
| Size |
25 ml, 50 ml |
|---|---|
| Brand |
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.